Features; Setting The Clock: Auto/Manual; Off Timer Setup - Zenith C27V36 Installation And Operating Manual, Warranty

Features

Setting the Clock
Before using the On/Off Timer features, set the current time on the
clock.
Auto Clock Setup
The time is set automatically through from a PBS broadcast signal.
The PBS channel signal includes information for the correct time and
daylight saving time.
1. Press the menu button and then use
Timer menu.
2. Press the G and then use
3. Press the G and then use
4. Press the G button and then use the
zone of your viewing area. Your choices are:
,
, and
G
5. Press the button and then use the
G
6. Press the button and then use the
whether or not your viewing area observes Daylight Savings Time.
7. Press the exit button to save and return to TV viewing.
Manual Clock Setup
1. Press the menu button and then use
Timer menu.
G
2. Press the and then use
G
3. Press the button and then use the
G
4. Press the button and then use the
G
5. Press the button and then use the
minutes.
6. Press the exit button to save and return to TV viewing.

Off Timer Setup

Off Timer automatically switches the TV to standby mode at the preset
time.
1. Press the menu button and then use
Timer menu.
G
2. Press the and then use
3. Press the G and then use
4. Press the G button and then use the
5. Press the G button and then use the
minutes.
6. Press the exit button to save and return to TV viewing.
Note
• If the same time is set for both on time and off time, only off time
operates.
D /
E
D / button to select
E
D / button to select
E
D / button to select the time
E
,
.
D / button to set a PBS channel.
E
D /
E
, , and
D /
E
D / button to select
E
D / button to select
E
D / button to set the hours.
E
D
/
D /
E
D / button to select
E
D / button to select
E
D / button to set the hours.
E
D /
button to select the
.
.
,
,
,
button to set
, depending on
button to select the
.
.
E button to set the
button to select the
.
.
button to set the
E
12
CH.
CH.
CH.