Channel Search; Memorizing The Channels With Ez Scan - Zenith C27V36 Installation And Operating Manual, Warranty

Basic TV Setup and Operation

Channel Search

Channel Search memorizes all the active channels in your area. You must do a channel search before
you can use the TV.
There are two ways of memorizing channels. You can use either.
One is EZ Scan and the other is MANUAL PROGRAM.
In EZ Scan, the TV memorizes the channels in ascending numerical order. If there are additional
channels you want to add or delete, add or delete them manually.

Memorizing the Channels with EZ Scan

EZ Scan searches and memorizes all the active channels in your area.
Select the desired channel with the
1. Press the menu button and then use
Channel menu.
2. Press the G and then use
G
3. Press the and then use
G
4. Press the button. The EZ Scan function starts.
If you want to stop auto programming, press the ENTER ( ) button.
Only the channels searched up to that time are memorized.
Notes
• works faster than
• If broadcast signals are poor quality, try memorize channels again
using
• EZ scan stores all available channels regardless of signal (RF, Cable
1-2).
• If over-the-air and Cable TV channels are duplicated, use the
number buttons (0 ~ 9) to change channels for:
Over-the-Air Channels
D / buttons.
E
D /
E
D / button to select
E
D / E button to select
.
Cable TV Channels
button to select the
.
or .
.
.
10
CH.
/ / %