Antenna Connections - Zenith C27F33 Installation And Operating Manual, Warranty

Direct view tvs
Table of Contents

Advertisement

Antenna Connections

Combination
VHF/UHF Antennas
TV rear
300 ohm
Flat Wire
75 ohm
Antenna
Jack
300 to 75
ohm Adapter
Connecting an Outdoor Antenna
For the best reception, we recommend you use an outdoor antenna.
Severely weathered antennas and antenna cables can reduce the signal quality. Before making any
connections, inspect all antenna hardware. Any service center can explain the various outdoor antennas
available to you.
300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to the screws on
the 300 ohm to 75 ohm adapter.
2. Push the end of 300 ohm to 75 ohm adapter
onto the 75 ohm antenna jack.
Connecting a CATV Cable
If you subscribe to a CATV system, make the antenna connection as described below.
1.
75 ohm
Antenna Jack
1. Remove the 300 to 75 ohm adapter or the cable from the TV, if attached.
2. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack.
75 ohm
Coaxial
Cable
300 to 75
75 ohm
ohm Adapter
CATV Cable
75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to
the 75 ohm antenna jack.
2.
300 to 75 ohm
Adapter
24
300 ohm Flat Wire
75 ohm CATV Cable
from cable TV source

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C32f33

Table of Contents