Maintenance And Repair; Cleaning And Care; Inspection - Bosch rexroth A36VM Instruction Manual

10 Maintenance and repair

Overdue inspection and maintenance work!
Property damage!
▶ Perform the specified inspection and maintenance work at the intervals
described in this manual.
10�1 Cleaning and care
Damage to seals and electrical system due to mechanical effects!
The jet of a high-pressure cleaner may damage the seals and electrical system of
the axial piston unit!
▶ Do not point a high-pressure cleaner at sensitive components, e.g. shaft seal,
electrical connections and components.
For cleaning and care of the axial piston unit, observe the following:
▶ Check whether all seals and plug-in connections are securely seated to ensure
no moisture can penetrate into the axial piston unit during cleaning.
▶ Use only water and, if necessary, a mild cleaning agent to clean the
axial piston unit. Never use solvents or aggressive cleaning agents.
▶ Remove major external contamination and keep clean sensitive and important
components, such as solenoids, valves, indicators and sensors.
10�2 Inspection
In order for the axial piston unit to be reliable and long-lasting, Bosch Rexroth
recommends inspecting the hydraulic system and axial piston unit on a regular basis,
and documenting and archiving the following operating conditions:
Table 12: Inspection schedule
Tasks to be performed
Hydraulic Check hydraulic fluid level in the reservoir.
system
Check the operating temperature under comparable
load condition at the drain port and in the reservoir.
Perform hydraulic fluid analysis: Viscosity, aging and
contamination
Check filter.
The replacement interval may vary depending on the
cleanliness of the hydraulic fluid. We recommend
using a contamination indicator.
Maintenance and repair | A36VM
NOTICE
NOTICE
RE 91650-01-B/2021-07-19, Bosch Rexroth AG
43/54
Interval
Daily
Weekly
Yearly or every 2000
operating hours
(whichever occurs first)
Yearly or every 1000
operating hours
(whichever occurs first)