Table of Contents
Advertisement
2. Setting up the monitor
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is
required for MPRT.
• AdaptiveSync and MPRT cannot be
enabled simultaneously.
• MRPT is to adjust brightness for
blur reduction, so cannot adjust
brightness and SmartImage while
MRPT is turned on.
• MPRT is gaming-optimized mode.
It is recommended to turn off
when you are not using the gaming
function.
3
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
2560 × 1440. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use
2560 × 1440 for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
Physical Function
4
Tilt
20
-5
Swivel
-35
Height adjustment
9
+35
130mm
Advertisement
Table of Contents
