Related Manuals for Philips 275V8
Summary of Contents for Philips 275V8
- Page 1 V Line 275V8 www.philips.com/welcome EN User manual Customer care and warranty 19 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
5. Technical Specifications ....14 5.1 Resolution & Preset Modes ..17 6. Power Management ....18 7. Customer care and warranty ...19 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy ......... 19 7.2 Customer Care & Warranty ..22 8. Troubleshooting & FAQs ..23 8.1 Troubleshooting ...... -
Page 3: Important
This electronic user’s guide is intended • Remove any object that could fall for anyone who uses the Philips monitor. into ventilation holes or prevent Take time to read this user manual proper cooling of the monitor’s before you use your monitor. - Page 4 1. Important monitor damage will not be covered • Oil-based cleaning solutions may under warranty. damage the plastic parts and void the warranty. • Do not knock or drop the monitor during operation or transportation. • Unplug the monitor if you are not going to use it for an extensive • Excessive usage of monitor can cause period of time.
-
Page 5: Notational Descriptions
1. Important Uninterrupted display of still or 1.2 Notational Descriptions static images over an extended The following subsections describe period may cause “burn-in”, also notational conventions used in this known as “after-imaging” or “ghost document. imaging”, on your screen. • “Burn-in”, “after-imaging”, or Notes, Cautions and Warnings “ghost imaging”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take-... -
Page 7: Setting Up The Monitor
2.1 Installation screen. Attach/Slide the base column with the monitor until it clicks into Package contents position. V Line 275V8 Quick Start Register your product and get support at www.philips.com/welcome Power 2. Hold the monitor base stand with... - Page 8 2. Setting up the monitor Connecting to your PC AC power input HDMI 1 input HDMI 2 input DisplayPort input Audio output Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3.
-
Page 9: Operating The Monitor
2. Setting up the monitor 2.2 Operating the monitor Description of the control buttons 275V8LA 275V8L Switch monitor’s power ON Switch monitor’s power ON and OFF. and OFF. Access the OSD menu. Access the OSD menu. Confirm the OSD Confirm the OSD adjustment. adjustment. Adjust the OSD menu. - Page 10 On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD monitors. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
- Page 11 2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 2560 x 1440. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 2560 x 1440 for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
-
Page 12: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 13: Image Optimization
There are multiple selections: FPS, in real time. Whether you're working Racing, RTS, Gamer 1, Gamer 2, LowBlue with text applications, displaying images Mode, EasyRead, Off. or watching a video, Philips SmartImage delivers great optimized monitor performance. ... -
Page 14: Smartcontrast
LED displays can cause eye What is it? damage and affect vision over time. Unique technology that dynamically Developed for wellbeing, Philips analyzes displayed content and LowBlue Mode setting uses a smart automatically optimizes a Monitor's software technology to reduce contrast ratio for maximum visual harmful shortwave blue light. -
Page 15: Adaptive Sync
4. Adaptive Sync AMD Radeon R9 285 • 4. Adaptive Sync AMD Radeon R7 260X • AMD Radeon R7 260 • ■ Processor A-Series Desktop and Mobility APUs Adaptive Sync AMD A10-7890K • PC gaming has long been an imperfect AMD A10-7870K •... -
Page 16: Technical Specifications
5.Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type VA (275V8L/275V8LA) Backlight W-LED Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.2331(H) mm x 0.2331(V) mm Contrast Ratio (typ.) 4000:1 Optimum Resolution 2560 x 1440 @ 60 Hz Viewing Angle 178°... - Page 17 5.Technical Specifications Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , at 115VAC , at 230VAC, 50Hz 60Hz 60Hz Normal Operation 26.1 W (typ.) 25.2 W (typ.) 25.6 W (typ.) Sleep (Standby mode) 0.5 W 0.5 W 0.5 W Off mode...
- Page 18 5.Technical Specifications Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 19: Resolution & Preset Modes
5.Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 2560 x 1440 @ 75 Hz Recommended Resolution 2560 x 1440 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67... -
Page 20: Power Management
6.Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 21: Customer Care And Warranty
Pixel Defect Policy sub pixels together appear as a single white pixel. When all are dark, the three Philips strives to deliver the highest colored sub pixels together appear as a quality products. We use some of the single black pixel. Other combinations of... - Page 22 Red + Green = Yellow of the same type that are near to one Green + Blue = Cyan (Light Blue) another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances...
- Page 23 7.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 3 or fewer...
-
Page 24: Customer Care & Warranty
If the Certified Service Partner cannot perform the required repairs under the offered extended warranty package, we will find alternative solutions for you, if possible, up to the extended warranty period you have purchased. Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. • Local Standard •... -
Page 25: Troubleshooting & Faqs
No Picture (Power LED not lit) power source immediately for safety • Make sure the power cord is plugged • Contact with Philips customer service into the power outlet and into the representative immediately. back of the monitor. Imaging Problems •... - Page 26 For further assistance, refer to the Service contact information listed in Important period may cause "burn-in", also information manual and contact Philips known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", customer service representative.
-
Page 27: General Faqs
Shut down your computer, disconnect handling the monitor, make sure your old monitor and reconnect your that there is no pressure or force Philips LCD monitor. applied to the panel surface side. This may affect your warranty • Turn on your monitor and then turn conditions. - Page 28 “ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations. You...
- Page 29 “Attention” to show the unlock/ lock status as shown below illustrators. Q14: W here can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
- Page 30 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.