Table of Contents
Advertisement
491
Stopping
1.
Release throttle trigger and
allow engine to idle.
2.
Move ignition switch DOWN to
"O" position.
Note: If engine does not stop,
pull choke control knob
out fully to stop engine.
Return the unit to your
authorized dealer to check
and repair stop switch
before starting the engine
again.
Do not operate with a loose chain.
Checking Chain Tension
Chain tension should be checked
frequently during work and corrected
as necessary.
Tension the chain as tight as possible,
but so it can still be pulled easily
along the bar by hand.
Chain Lubrication Test
Hold the chain just above a dry
surface and open the throttle to half
speed for 30 seconds.
A thin line of "thrown" oil should be
seen on the dry surface.
X7503312606
© 02/24 ECHO Incorporated
Ignition
Switch
Throttle
Trigger
Shown with Optional
Kick Guard
Shown with Optional
OPERATION
TM
TM
Kick Guard
35
Advertisement
Table of Contents
