Finalize; Disc Label; Disc Protect - Zenith DVR413 Installation And Operating Manual

Pre-operation Setup (Continued)

Finalize

Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
MENU/LIST or TITLE.
Caution
After you've finalized a disc recording on a DVD-R,
DVD-RW, or a DVD+R disc, you can't edit or record
anything else on that disc except on a DVD+RW
disc.
Disc Format
Finalize

Disc Label

Disc Protect

Follow steps 1-3 as shown on page 27 (Disc
1 1
Format).
Use v / V to select the Finalize option.
2 2
Press B to move to the third level.
3 3
Finalize is highlighted.
Press ENTER.
4 4
Finalize menu appears.
Finalize
Do you want finalization?
Ok
Select Ok then press ENTER.
5 5
The Recorder starts finalizing the disc.
ote
How long finalization takes depends on the type of disc,
how much is recorded on the disc, and the number of
titles on the disc. A heavily recorded disc can take up to
8 minutes or more to finalize.
ip
If you load a DVD-RW or DVD+RW that has already
been finalized, you can 'unfinalize' it by choosing
Unfinalize from the Finalize menu. After doing this, you
can edit and re-record onto the disc.
Disc Label
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
28
Finalize
Unfinalize
Cancel
• The disc name can be up to 32 characters long.
• For discs formatted on a different DVD Recorder, you
will see only a limited number of characters.
Disc Format
Finalize
Disc Label
Disc Protect
Follow steps 1-3 as shown Disc Format on page
1 1
27.
Use v / V to select the Disc Label option.
2 2
Press B to move to the third level.
3 3
Edit icon is highlighted.
Press ENTER.
4 4
Keyboard menu appears.
DVD-RW
1 2
A B
K L
U V
OK
Enter a name for the disc. Use v V b B to select
5 5
a character then press ENTER to confirm your
selection.
• Alphabet Capital: Switches the keyboard to upper case
characters.
• Alphabet Small: Switches the keyboard to lower case
characters.
• Symbols: Switches the keyboard to symbol characters.
• OK: Select to finish.
• Cancel: Select to exit the menu.
• Space: Inserts a space at the cursor position.
• Delete: Deletes the previous character at the
cursor position.
• b / B: Moves cursor to left or right.
Remote control buttons for entering a name
N (PLAY): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes the next character from the cur-
sor position.
x (STOP), CLEAR: Deletes the previous character at the
cursor position.
. / >: Moves cursor to left or right.
Numbers (0~9): Enters the character of corresponding
location on the selected column.
MENU/LIST, DISPLAY: Switches the keyboard type
(Alphabet Capital, Alphabet Small, Symbols)
Choose OK then press ENTER to save the name
6 6
and return to the Setup menu.
Press SETUP to exit the menu.
7 7
Edit
6 (1.6)
Alphabet Capital
3 4 5 6 7 8 9 0
C D E F G H I J
M N O P Q R S T
W X Y Z
Cancel Space Delete