Rear Panel - Zenith DVR413 Installation And Operating Manual

Rear Panel Connections
ANT. IN
Connect the antenna to this terminal.
RF. OUT
Passes the signal from the ANTENNA to your TV/monitor.
Caution
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
COMPONENT VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
VIDEO OUT/AUDIO OUT (Left/Right)
Connect to a TV with video and audio inputs.
VIDEO IN 1 / AUDIO IN 1 (Left/Right)
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
S-VIDEO OUT
Connect to an S-Video Input on TV.
AC Power Cord
Plug into the power source.
15