Front Panel - Zenith DVR413 Installation And Operating Manual

Front Panel

INPUT2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
POWER button and indicator
Switches the DVD Recorder ON or OFF.
Lights up red when the Recorder is in
standby mode.
INPUT 2 (S-VIDEO IN)
Connect the S-Video output of an
external source (TV/ Monitor, VCR,
Camcorder, etc.).
CHANNEL (+ / -)
Scans up or down through
memorized channels.
Shows the current status of the DVD Recorder.
Go to beginning of current chapter/ track or to previous chapter/track.
Press and hold for two seconds for a fast reverse search during playback.
Press and hold for two seconds for a fast forward search during playback.
12
DV INPUT
Connect the DV output of a digital camcorder.
Disc Tray
Insert a disc here.
Display window
Point the DVD Recorder Remote Control here.
Starts recording. Press repeatedly
Stops playback or recording.
Pause playback or recording temporarily,
press again to exit pause mode.
To play back a disc.
OPEN/CLOSE (Z)
Opens or closes the disc tray.
Remote Sensor
m/.
>/M
Go to NEXT chapter/track.
REC (z)
to set the recording time.
STOP (x)
PAUSE (X)
PLAY (N)