Connections Panel; Remote Control Operation; Remote Control Battery Installation - Zenith DVB318 Installation And Operating Manual

Zenith dvb318: operating guide
Hide thumbs Also See for DVB318:
Table of Contents

Advertisement

Connections Panel

COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AUDIO OUT (Left / Right)
Connect to an amplifier, receiver, or
stereo system.
VIDEO OUT
Connect to a TV with video inputs.
COMPONENT VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.

Remote Control Operation

Point the remote control at the remote sensor
and press the buttons.

Remote Control Battery Installation

Detach the battery cover on the
rear of the remote control, and
insert two size AAA batteries with
and
aligned correctly.
DVI-D DIGITAL OUT
Connect to a TV with DVI connector.
Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause
permanent damage to the unit.
AC Power Cord
Plug into the power source.
Caution:
Do not mix old and new batteries.
Never install different types of
batteries such as standard, alkaline,
etc.
Before using the remote control,
press the DVD, VCR, CATV or TV
button to select the device to be
operated.
9

Advertisement

Table of Contents
loading

Table of Contents