Additional Features; Last Scene Memory; Screen Saver; Video Mode Setting - Zenith DVB318 Installation And Operating Manual

Additional Features

Last Scene Memory

DVD
This player memorizes last scene from the last
disc that is viewed. The last scene remains in
memory even if you remove the disc from the
player or switch off the player. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
Note: This player does not memorize
the scene of a disc if you switch off the
player before commencing to play the
disc.

Screen Saver

The screen saver appears when you leave the
DVD player in Stop mode for about five minutes.
After the Screen Saver is displayed for five
minutes, the DVD Player automatically turns
itself off.

Video Mode Setting

DVD
With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace
is not perfectly matched with the disc. In this
case, the picture quality may be improved by
changing the video mode.
To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
The new video mode indicator appears on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure
until picture quality is improved.
Video mode sequence: Auto → Film → Video
If you turn off the power, the video mode will
return to initial default state (Auto).
Auto: The source material of the DVD video
(film material or video material) is determined
from disc information.
Film: Suitable for playing film based content or
video based material recorded by the
progressive scan method.
Video: Suitable for playing video based
content with comparatively little motion.
CD VCD
VCD
23