Table of Contents
Advertisement
To set sea level pressure reading
1. Hold down D until "WEATHER" scrolls on the display, which indicates the weather setting screen.
* The weather indicators start to flash.
2. Press C, "SEA LEVEL" scrolls on the display, which indicates reading setting screen.
* The current sea level pressure reading starts to flash.
3. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed.
4. Press D to exit the setting screen.
* If there is no button operation for 2-3 minutes at setting screen, the display will return to Barometer mode
automatically.
To set current weather
1. Hold down D until "WEATHER" scrolls on the display, which indicates the weather setting
screen.
* The weather indicators start to flash.
2. Use A (+) and B (-) to change the setting as in the following:
BARO
3. Press D to exit the setting screen.
* If there is no button operation for 2-3 minutes at setting screen, the display will return to Barometer mode
automatically.
ALTIMETER MODE
D
C
P
E
Use C to enter Altimeter mode.
* Mode prompt "ALTI" is displayed first.
- Altimeter mode indicator is shown.
- The altimeter is of 1 meter (or foot) resolution and with working range from -700 meters (-2296 feet) to 9000
meters (29520 feet).
- Altitude reading in meters or feet selectable.
- Graph showing the changes in altitude is provided.
* Graph will be cleared only after battery replacement or reset.
- Maximum 20 altitude data can be stored.
Reading the altitude graph
The altitude graph shows the relative changes in altitude in the past with the current altitude represented on the
right. Each horizontal point represents 15 minutes while each column represents the relative reading of altitude
in that time.
* It is not possible to get the exact reading from the graph. User can only get the trend of changes from the graph.
To switch between meters and feet
Hold down B until the unit indicator (M or Ft) stops flashing to switch altitude reading between meters and feet.
To store altitude data
Hold down A until "DATA" stops flashing to store the current altitude data.
A
BARO
B
A
M
ALT I
B
A
A
BARO
B
B
A
BARO
B
9
Advertisement
Table of Contents
