Compass Mode - barigo 46 Instruction Manual

Use C to enter Time mode.
* Mode prompt "TIME" is displayed first.
- There are 2 time modes, Normal Time (indicated by T1) and Dual Time (indicated by T2), and they count up
individually with the same second.
- There are 3 displays for time. They are Time, Time with Barometer and Time with Weather.
- There is an auto-calendar from 2000 to 2049.
To switch between Normal Time and Dual Time
Hold down B until the mode indicator (T1 or T2) stops flashing to switch between Normal Time mode and Dual
Time mode.
To switch among the 3 time displays
Use A or E to switch among the 3 displays for time.
* "TIME", "BAROMETER" or "WEATHER" is displayed first.
Day of the Week
Day
T1
P
F
Time
* Graph of sea level pressure is described in BAROMETER MODE.
To set time
1. Hold down D until the hour digits start to flash on the display, which indicates the setting screen.
2. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed.
3. Press C to advance to the next setting as in the following:
HOUR
C
* When second digits are flashing, press A or B to reset the digits to 00. Resetting seconds when the digits are
between 00 to 29 will leave the minute digits unchanged, or between 30 to 59 will increase the minute digits
by one.
* When 12 or 24 is flashing, press A or B to switch between 12- or 24-hour formats. If 12-hour format is chosen,
A or P indicator will be shown.
4. Press D to exit the setting screen and day of the week will be adjusted automatically.
* If there is no button operation for 2-3 minutes at setting screen, the display will return to Time mode
automatically.

COMPASS MODE

Graph of sea
level pressure
T1
P
A or E
Time
Current sea level
pressure
Time / Barometer
A or E
C
MINUTE
C
12/24H
T1
P
A or E
mbar
/ hPa
Temperature
Time / Weather
C
SECOND
C
DAY
Weather icon
F
Unit indicator of
temperature
C
YEAR
C
MONTH
5