1. Manuals
  2. Brands
  3. barigo Manuals
  4. Watch
  5. 46
  6. Instruction manual

barigo 46 Instruction Manual

Altimeter/compass
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL for Altimeter/Compass No.46
English
T1
D
A
P
C
B
F
E
INTRODUCTION
The altimeter/compass No.46 is a digital product that provides altimeter, barometer, compass, altimeter data, dual
time, chronograph, chronograph data and alarm functions.
Features:
Altimeter
- 1 meter (or foot) resolution and with working range from -700 meters (-2296 feet) to 9000 meters (29520 feet).
- Graphical expression of changes provided.
- Unit in meters or feet selectable.
- 20 memories with date, time and altitude reading.
Barometer
- 1 mbar/hPa resolution and with working range from 300 mbar/hPa to 1100 mbar/hPa.
- Graphical expression of changes provided.
- 24 hours barometric Date recall
- Both sea level pressure and absolute pressure can be shown.
- Weather forecast.
- Temperature displayed in °F or °C selectable.
Compass
- Electronic compass providing 16 cardinal indications together with bearing in degrees.
- Declination correction provided.
Time
- 2 time modes selectable.
- Presents day of the week, day, hours, minutes and seconds (year and month can also be set).
- 12/24-hour formats selectable.
- Auto-calendar from 2000 to 2049.
Chronograph
- 1/100-second resolution with working range up to 24 hours.
- 100 memories for lap/split times stored in a maximum of 30 runs.
Alarm
- 2 daily alarms.
- Hourly chime.
Electro-luminescent backlight
- 3 seconds light up EL backlight.
1

Advertisement

Table of Contents
loading

Related Manuals for barigo 46

Summary of Contents for barigo 46

  • Page 1 INSTRUCTION MANUAL for Altimeter/Compass No.46 English INTRODUCTION The altimeter/compass No.46 is a digital product that provides altimeter, barometer, compass, altimeter data, dual time, chronograph, chronograph data and alarm functions. Features: Altimeter - 1 meter (or foot) resolution and with working range from -700 meters (-2296 feet) to 9000 meters (29520 feet).

  • Page 2: Basic Operation Of Buttons

    BASIC OPERATION OF BUTTONS A: - SWITCH AMONG DISPLAYS - TAKE BEARING - RECALL BAROMETRIC DATE (PRESS AND HOLD) - STORE ALTITUDE DATA (PRESS AND HOLD) - FORWARD SELECTION OF ALTITUDE DATA - START/LAP OF CHRONOGRAPH - RETRIEVE DATA IN RUN - TURN ALARM ON AND OFF - FORWARD SETTING (SET OR CALIBRATION) B: - SWITCH BETWEEN NORMAL TIME AND DUAL TIME (PRESS AND HOLD)
  • Page 3 MODE CHANGE OPERATION There are 9 modes: Normal Time, Dual Time, Compass, Barometer, Altimeter, Altimeter Data, Chronograph, Chronograph Data and Alarm. Press C to change from mode to mode, hold down B to switch between Normal Time mode and Dual Time mode as in the following: Hold B NORMAL TIME...

  • Page 4: Time Mode

    TIME MODE Hold B...

  • Page 5: Compass Mode

    Use C to enter Time mode. * Mode prompt “TIME” is displayed first. - There are 2 time modes, Normal Time (indicated by T1) and Dual Time (indicated by T2), and they count up individually with the same second. - There are 3 displays for time. They are Time, Time with Barometer and Time with Weather. - There is an auto-calendar from 2000 to 2049.

  • Page 6: Calibration Screen

    Cardinal indicator South indicator Hold D Bearing COMP COMP Compass mode indicator North indicator CALIBRATION SCREEN Use C to enter Compass mode. * Mode prompt “COMP” is displayed first and bearings will be taken automatically. - Compass mode indicator is shown. - When you take bearings, readings are shown in 16 cardinal indications together with bearing in degrees.

  • Page 7: Barometer Mode

    1. Press A, bearings will be taken and shown for about 10 seconds. * If no bearing is being taken, the display shows “----”. 2. Hold down A, bearings will be taken and shown continuously and for 10 seconds more after A is released. BAROMETER MODE Graph of Sea Weather...
  • Page 8 Use A or E to switch among the 3 displays for barometer mode. Reading the graph of sea level pressure The graph shows the relative changes in sea level pressure in the past with the current pressure represented on the right. Each horizontal point represents one hour while each vertical point represents the relative reading of pressure in that time.

  • Page 9: Altimeter Mode

    To set sea level pressure reading 1. Hold down D until “WEATHER” scrolls on the display, which indicates the weather setting screen. * The weather indicators start to flash. 2. Press C, “SEA LEVEL” scrolls on the display, which indicates reading setting screen. * The current sea level pressure reading starts to flash.

  • Page 10: Altimeter Data Mode

    * “STORED” and data number are shown. To calibrate altitude reading 1. Hold down D until the current altitude reading starts to flash on the display, which indicates the setting screen. 2. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed. 3.

  • Page 11: Chronograph Data Mode

    To measure elapsed time 1. Press A to start the chronograph. 2. Press B to stop the chronograph. * You can resume the measurement operation by pressing A. 3. Hold down B until the next run number is shown on the display. * Data of the current run is stored and chronograph is reset to all zeros.

  • Page 12: Alarm Mode

    Use C to enter Chronograph Data mode. * Mode prompt “CHRO DATA” is displayed first. - Run number, date, lap/split time of each lap, best lap time and average lap time can be retrieved. - If chronograph is running, chronograph data cannot be cleared. To retrieve the chronograph data 1.

  • Page 13: Chime On/Off

    HOUR MINUTE REFER TO T1/T2 CHIME ON/OFF * When TIME 1 or TIME 2 is flashing, press A or B to switch between setting the alarm to refer to Normal Time (TIME 1) and Dual Time (TIME 2). * When ON or OFF is flashing, press A or B to turn the chime on (indicated by ON) and off (indicated by OFF). If chime is turned on, the chime on indicator will be shown after exiting setting screen.

Table of Contents