Table of Contents
Advertisement
Available languages
Available languages
Blender with grinder BLG-620, BLG-621
This blender is designed for blending, mixing and grinding foods. It is only to be used
for household purposes and is not meant for commercial or industrial use. Not to be
used outdoors.
Voltage: 220-240V~ 50/60Hz
Power: 500W
Capacity: 1.5L blender jar
NOTE: Do not operate the appliance continuously for more than 60 seconds. After
continuous operation, please let the unit rest for 10 minutes before any further usage
of the appliance.
DESCRIPTION OF THE APPLIANCE
1.
Filler cup
2.
Blender lid
3.
Blender jar
4.
Silicone gasket
5.
Blender blade set
6.
Dry mill cup
7.
Silicone gasket
8.
Dry mill blade set
9.
Speed control buttons (0/1/2/Pulse)
10. Blender base
11. Stir Stick
•
Before using the appliance, please check the voltage and the type of plug that is
required for your location.
•
Before using it for the first time, remove all packing materials from the appliance
and its accessories. Clean and dry the appliance thoroughly as described in the
"CARE AND MAINTENANCE" section.
•
Place the appliance on a smooth, flat and stable working surface.
•
Make sure the silicone gasket is in place on outer rim of the blade assembly. The
silicone gasket must lie flat.
OPERATING INSTRUCTIONS
Prepare food for blending
•
Wash all food items carefully.
•
Some vegetables and fruits have to be peeled. Such are oranges, tangerines,
lemons, mangos, kiwis, melons, pineapples, etc.
•
If necessary, remove pits and stones (e.g. from cherries, prunes, apricots,
peaches, etc.) and pith (e.g. from apples, pears, etc.).
•
Cut vegetables and fruits into small pieces (approximately 2x2x2cm).
Blender use
1.
Place the blender jar on the base of the blender and turn it clockwise to lock it
in place.
2.
Put ingredients into the blender jar. Fill it below the MAX mark on the scale of
the jar. Do not overfill.
Note: Very hard products should be cut into pieces and blended with a
little water.
3. Close the blender lid tightly and then put on the filler cup. Do not operate the
blender unless the lid and the filler cup are correctly fitted.
4.
Insert the power plug into the mains supply outlet.
5.
Set the required operating mode (1 or 2) or use the Pulse mode to
start blending.
IMPORTANT
5
Advertisement
Table of Contents
