After Sales Service - Binatone BLG-620 Instruction Manual

► This appliance is intended to be used in household only and similar applications
such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses'
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SPECIAL SAFETY MEASURES
► Never attempt to remove any parts during the operation of the blender. Always
wait until the blade stops running, switch off the appliance before adding
ingredients, and disassembling or removing food from the blender jar or dry
mill cup.
► Switch the appliance on only when fully assembled. Before use, always check
whether it is assembled properly.
► Never turn on the blender without food inside.
► Always add water when blending hard ingredients.
► Always cool hot food before processing (max. 65°C).
► Never assemble or disassemble the blender jar to the motor base while the
power is on and the motor is running.
► Do not overfill the blender jar or the dry mill cup. This could cause damage to
the motor.
► The blender jar is not suitable as a storage container. Do not leave ingredients
to stand inside it either before or after processing.
► Always use the spatula or spoon to remove foods from the blender jar or the
dry mill cup but only when the appliance is not running, avoid hands or fingers
touching the sharp blades.
► Care should be taken when handling the sharp blades, emptying the blender jar
and during cleaning.
► Never switch off the appliance by turning the blender jar, the dry mill, or their
lids. Always switch off the appliance by pressing speed button "0".
► If a burning smell, strange sounds or lowered performance are noticed during
operation, unplug the blender immediately and clean it. If normal operation is
not restored, contact an authorized service center.
AFTER-SALES SERVICE
If your appliance does not operate or does not operate properly, contact an
authorized service centre for consultancy or repair.
The warranty does not cover:
- Product packing, consumables and accessories (knives, tips, etc.);
- Mechanical damages and natural wear of the product;
- Failures due to overloading, improper or careless maintenance, penetration of
liquids, dust, insects and other foreign matter inside the product, exposure of
plastic and other non thermal-resistant components to high temperatures, force-
majeure circumstances (accidents, fire, flooding, power grid failure, lightning
strike, etc.);
- Damages caused by:
► Non-fulfillment of the above-mentioned precautions and operating manuals.
► Application in commercial purposes (application of the product beyond personal
daily living needs).
► Connection to a grid with a voltage that differs from what is indicated on the
appliance.
► Unauthorized repair or replacement of the components of the appliance,
performed by an unauthorized person or service centre.
11