–
Position the controls on the right half of the handlebar.
Guideline
Screw, throttle grip
Screw, start/stop but-
ton
F03860-01
–
Position the controls on the left handlebar half.
Guideline
Screw, fixed
grip
Screw, combi-
nation switch
F03859-01
(All XC‑F models)
–
Preassemble the hand guards on the left and right.
S05570-11
–
Mount the handguard.
Guideline
Screw, hand lever
–
Repeat the operation on the opposite side.
–
Mount the cable ties.
S05571-11
–
Remove the start number plate. (
–
Join all plug-in connectors.
–
Route the cables without tension and secure with the cable
ties.
–
Install the start number plate. (
F03861-01
M6
5 Nm (3.7 lbf ft)
EJOT PT
®
2 Nm (1.5 lbf ft)
K50x18 T20
M4
5 Nm (3.7 lbf ft)
Loctite
EJOT PT
®
2 Nm (1.5 lbf ft)
K50x18 T20
M6
5 Nm (3.7 lbf ft)
p. 12)
p. 12)
SETUP 2
®
243™
5