KTM 350 SX-F 2023 Setup Instructions page 15

3.8 Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
3.9 Mounting the seat
–
Remove screw
S05350-10
–
Raise seat, pull it toward the fuel tank and take it off.
S05351-10
–
Attach the seat to the collar bushings at the front and simulta-
neously push it back.
The holding lugs engage in the recesses at the back.
–
Make sure the seat is latched in place correctly.
S05352-10
1
.
ARBEITEN 3
13