Enter I Record Advance Key - IBM 5291 Operator's Manual

2-12
Enter/Record Advance Key
DD DDDDDDDDDDDDDCDJCDJCDJ
DD IDJDDDDDDDDDDDIDlRDDDD
DD !DJDDDDDDDDDDDDtmDD§
DD ODDDDDDDDDDDIIllDDDD
DD
[DJ
•CDJCDJ
Press the Enter/Rec Adv key to indicate that the entered data is
ready to be sent to the system.
An error code appears on the display screen and no data is sent
to the system if you press the Enter/Rec Adv key when:
• No data has been entered in a mandatory entry field but data
has been entered elsewhere on the display screen.
• A mandatory fill field contains some data but is not filled.
• A self-check field is not correct.
• The cursor is in a field exit required field.
• The display station is operating w.ithout the control of the
system program (that is, with an unformatted display).
To recover from the error see Chapter 3, Error Coe/es and
Recovery Procedures for the meaning of the error and do the
recovery procedure listed.
To use the Enter/Rec Adv key:
Press the key.