I Connecting Headphones; I Digital Output; I Connecting An Expression (Exp) Pedal; I Connecting Midi Devices - Yamaha UD-Stomp User Manual

I Connecting Headphones

Connect a pair of headphones to the PHONES jack
(standard stereo) on the UD-Stomp to play or prac-
tice in private.
The volume of the headphones can be controlled
with the OUTPUT knob.
* When a pair of headphones is connected, the output from the
OUTPUT jack and the DIGITAL OUT jack will still deliver
sound output.
When using headphones, use at a comfort-
able volume so as not to cause shock to your
hearing.

I Digital Output

The UD-Stomp is equipped with a DIGITAL output
jack (COAXIAL, 44.1 kHz), that can be connected
to the DIGITAL INPUT jack on a digital mixer, MD
recorder, etc.
* The output level of the DIGITAL OUT jack cannot be con-
trolled with the OUTPUT knob (fixed).
Digital Mixer, MD Recorder, etc.
I Connecting an Expression (EXP)
Pedal
A foot controller (expression pedal), such as the
Yamaha FC-7 (optional) connected to the UD-
Stomp's EXP. PEDAL jack allows control of the UD-
Stomp's individual parameters with your foot. (→
page 24, 26, 27)

I Connecting MIDI Devices

The UD-Stomp's MIDI IN/OUT jacks allow the ex-
change of MIDI information between the UD-Stomp
and an external MIDI device.
Using MIDI you can take data from the UD-Stomp
and store it in a MIDI device such as the Yamaha
MIDI Data Filer MDF3, etc. or load data from the
external device into the UD-Stomp.
You can also use a MIDI foot controller, etc. con-
nected to the UD-Stomp to select patches, control
individual parameters, etc., and an external MIDI
device can be controlled from the UD-Stomp. Refer
to the [Utility Mode] (page 25) for more information
on MIDI functions.
Connections
11