Download Print this page

Yamaha PortaSound PSS-51 Owner's Manual page 48

Hide thumbs Also See for PortaSound PSS-51:

Advertisement

@ BULK
DATA
0000H
NOTE: The following data bytes are to be divided into 2 data
segments.
song #5 DATA
SONG
HEADER
0000H
song #1 DATA
0001H
song #2 DATA
0002H
song #3 DATA
0003H
song #4 DATA
0004H
0005H
6b9FH
song #6 DATA
0006H
song #7 DATA
0007H
song #8 DATA
0008H
ne
0009H
Registration memory
===
data (400 bytes)
000ҮАН
0008H
000СН
0000Н
Bulk data consists of a
Song Header and the data
for 8 songs.
The data size
is fixed at 6bAOH bytes.
The length of the Header is
fixed as the first 16 bytes
60200
at the top of each song
data.
The data length of
each song is variable.
An
unrecorded area (the area
between Write Position
Data and Read Position
Data) exists somewhere in
the data for the 8 songs,
but only as long as the
capacity for further record-
ing remains.
When the
bulk data is dumped, this
unrecorded area is located
in the song selected using
the PSS-51
panel controls.
The position of this area in
the song is also shown by
the measure
number.
Once you upload the bulk
data back onto the PSS-51
however, the position of the
area will be reset to the top
of the song.
44
2222H
Less significant byte (LSB)
|] Address of Тор of Record for selected song (XXXXH)
Most significant byte (М5В)
LSB
Write Position Pointer
(address of write
position
H
MSB
J
(
р
ХУУУУН)
m
|» | Read Position Pointer (address of read position)(zzzzH)
MSB
Track status of song #1
Track status of song #2
@ Track Status:
Track status of song #3
[ътт | bite | bit s | bit 4 | bita | bit 2 | birt | bito
Track status of song #4
(eer мезет Meno MELODY CE
PAD | AUTO
1
2
3
4
5 | SYNTH
ACCOMP,
Track status of song #5
<
Track status of song #6
ch.5
ch6
ch7
ch8
ch9
ch.1-4
сћл6
-
Track status of song #7
status flag: 1=On, 0=Off
Track status of song #8
MIDI channels 1 to 16 respectively are assigned
the corresponding tracks as shown above.
In the
Dummy
case where Channel
messages exist in the tracks
Any data is OK.
MELODY 1 to 5, VECTOR SYNTH, and PAD, the
(2 bytes)
status flags should be 1. In the case where
chord data exist in the AUTO ACCOMP.
track, its
status flag should also be 1.
11110000
—— Top of Record
00000001
—— Song number (#) (this case: 1)
ABSOLUTE TEMPO
ABSOLUTE TEMPO
па!
tempo of this song
RECORDED DATA
| —
Write Position Data
UNRECORDED AREA
Data has no meaning
RECORDED DATA
11110010
----Епа of Record
11110000
]
Next Song Data
(this case: for Song #2)
.—— Read
Position Data
^

Advertisement

loading