Download Print this page

Yamaha PortaSound PSS-51 Owner's Manual page 37

Hide thumbs Also See for PortaSound PSS-51:

Advertisement

SONG
PLAYBACK
Once a recording is finished, the song can be played
back to verify what was recorded. Use the [RESET],
[REWIND], [STOP], [PLAY], and [FAST FORWARD]
buttons to control song playback from any measure
desired.
Ш То playback a song:
1.
Select а Song Number
Press the SONG#
[+] or [-] buttons to select the
song number to playback. The [SONG#/MEASURE]
display will show the selected song number.
m
Select/Cancel the Playback Tracks
Tracks with recorded data will be automatically
selected (the indicators will be lit). To cancel a
selected track, press the corresponding track button.
p
Start Playback
Use the [FAST FORWARD]
and [REWIND]
buttons
to get to a particular measure, then press the [PLAY]
button of SONG
MEMORY
to start the playback. If
the [RESET] button is pressed at any time, even
during playback, the measure number will return to
the beginning of the song.
FAST
RESET
REWIND
STOP
PLAY
FORWARD
UKI CIDO CS
=
Finish Playback
Press the [STOP] button of SONG
MEMORY
to
finish song playback at any time.
If the end of the
recorded song is reached, the MULTI
DISPLAY
will
automatically reset to measure "0 0 1" and the
playback will stop.
CAUTION:
If the AC power cord is disconnected or the batteries'
voltage runs low, song playback will stop. The song
data will be lost for the measure playing at the time
of stoppage.
2. OPERATION
GUIDE
| SONG
EDITING
The recording feature of the PSS-51 allows tracks to be
edited or completely changed without affecting any of
the other tracks.
B Clearing a Track
When clearing a track, make sure the indicator for the
track to be cleared is on.
1.
While holding down the [CLEAR] button, press the
select button for the track to be cleared.
The [SONG#/MEASURE]
display will show "c 1 r"
(clear) and the track's indicator will go out. The
entire track will be erased.
SONG MEMORY
TRADE
CLEAR
BEAT
HINT: While holding down the [CLEAR] button, press the [STOP]
button to clear every track from the current measure number
to the ending measure
simultaneously.
33

Advertisement

loading