Display Section; Specifications - Pioneer PD-P920M Service Manual

®
aaa EDIT 4COMPUD) OMPUD
DISC SCAN
PROGRAM [DELETE
ae
©®® @ ® ©
DISPLAY SECTION
@ Pressing COMPU PGM button to ON will cause
@ Dd mark beside the [COMPU] indicator to light.
@® Lights during playback.
@® Lights during pause mode, when playback is temporar-
ily interrupted.
@ If a nonexistent disc is searched for, the correspond-
ing disc symbol will light up.
© The [DISC SCAN] indicator blinks during disc scan and
the [SCAN] indicator blinks during track scan.
'© Lights after programming (after program has been
memorized).
@ Lights during random playback.
Lights during repeat playback.
© Lights during the Delete program.
DISC : Indicates disc number (1 ~ 6) during play-
back or search.
TRACK : Indicates track number (01 ~99) during
playback or search.
@ Display change
Changes when TIME button is pressed during CD
playback.
10. SPECIFICATIONS
Accessories
@ Six-compact disc magazine
NOTE:
®
"aan "ae Bp
oe
re
oe
TIME
REMAIN
TOTAL
: Displays the track number of the track be-
ing played (TRACK) and the elapsed time
(minutes and seconds).
: Displays the remaining time of the track
being played.
When the TIME button is pressed again,
the remaining time on the disc being
played will be displayed.
During program play, random play, delete
or delete random play operations, the DISC
REMAIN display will not be shown. Also,
tracks above 24 will not be indicated on
the REMAIN display.
: Displays the total number of tracks on the
disc (TRACK) and the overall playback
time of disc will be displayed.
During playback, the display goes on for
about 5 seconds before changing to the
TIME display.
During programmed play, the TOTAL dis-
play will indicate the total number of tracks
programmed (the total program time will
not be displayed).
69