Pioneer PD-P920M Service Manual page 59

PD-PSs20m
628m CLD
@) RANDOM PLAY button
Press to begin random playback.
@ REPEAT button
Press this button for repeat playback. Pressing the but-
ton once, twice or three times will change the repeat
mode from single track repeat, to all tracks repeat, and
repeat playback cancellation respectively.
@ DELETE button
Pressing this button and then selecting the discs with
DISC NUMBER buttons (1 through 6) or selecting the
tracks with Manual/Track search buttons will result
in the selected discs and tracks not being played even
when Play/Pause button is pressed.
® Display
© DISC NUMBER
buttons (1~6)
Use to select disc numbers for playback or pro-
gramming.
@ TIME button
This button selects the display mode of the indicator
panel.
When the button is pressed during CD playback, the
indication changes from TIME, REMAIN, to TOTAL in
that order. (For details concerning the display con-
tents, refer to the explanation about the ''DISPLAY
SECTION"'}
HI-LITE SCAN (DISC/TRACK) button
DISC SCAN: Press this button during stop mode to
play back a 10-second passage positioned one minute
after the beginning of the first track for each disc con-
tained in the magazine in the order of disc 1 through
disc' 6: © ;
TRACK SCAN: Press the button during DISC SCAN _
to play back a 10-second passage positioned one
minute after the beginning of each track in sequence
for each disc contained in the magazine in the order
of disc 1 through disc 6.
To reset the starting time of HI-LITE SCAN, press HI-
LITE SCAN button during normal playback. This stores
the elapsed play time and plays back each of the
10-second passages beginning from the stored time.
68 -
@ COMPU PGM button
Magazine insertion slot
@) Eject button (4)
Press to eject a magazine. When pressed, any maga-
zine inside is expelled forward.
@ PROGRAM button
Use to program a sequence of tracks
® Press this button after selecting a desired disc and
track with DISC NUMBER and Track search but-
tons. Tracks will be added in the order in which
they are specified.
® If only a DISC.NUMBER button is pressed, all tracks
on the specified disc will be added to the program.
The Jetters [AL] will be appear on the indicator.
@ Manual/Track search buttons (44 <4, PP Pb)
To perform
track search
in normal
playback,
programmed
playback or PAUSE mode.
.
You can advance to the next track or go back to the
previous one by using Manual/Track search buttons.
The fast forward or fast reverse function will be acti-
vated by holding down these buttons.
@® Stop button (@)
Press to stop playback. When pressed, the player goes
into stop mode and all.operations stop..
;
When pressed during stop mode, the program stored
in memory is cleared. ,
(5 Play/Pause button (> /HE)
Playback will begin if this button is pressed when the
CD player is stopped or paused. Pressing the button
during playback will cause the player to temporarily
pause.