Roland HP 145 Owner's Manual page 11

Playing the Keyboard
Tone
While holding down...
Press
2. After releasing the button, play the keyboard.
The button lamp stops blinking and stavs on, indicating that the tone selected in
Step 1 has been assigned to the [Tone] button.
When assigning tones to the [Tone] button, the tone is set by first selecting the tone in
4 Step 1 damp blinks), then playing the keyboard in Step 2 (lamp is lit). You can also set
MEMO the tone by pressing the blinking [Tone] button instead of playing tlie keyboard. If you
don't want to set the tone, then press the | Piano] button,
Playing with two different tones on the keyboard simultaneously is called "Dual
Play."
Layering the Piano tones and Strings tones
1. First, assign the Strings tone to the [Tone] button.
Tone
me Release the button and
play the keyboard.
Playing the keyboard sets
11