Table of Contents
Advertisement
At least one host station address is required for running the
online test. Ask your system administrator for the station
addresses. Valid station addresses are 0 through 6.
Which of the tests you run depends on whether the adapter is
connected to the host. The procedure for the tests is the same, except
that you specify the station addresses when you run the online test and
the PC is connected to the host.
Warning: Before you connect the adapter to or disconnect the
adapter from the host, contact the system administrator for the host
system. Connecting the adapter to the host can disrupt other
workstations on the same line.
Display Station Addresses
Ask your system administrator for the number of station addresses that
you plan to use. The first station address must be for a display
station. The second station address can be for either a printer or
another display station.
Circle the station addresses that you plan to use:
0
2
3
4
5
6
16 5250 Express Hardware Manual
Testing the Adapter
To run the tests:
1. Insert the backup copy of Support Diskette #2 in the A: drive and
power on your PC. The 5250 Emulation Adapter Tests screen,
similar to the one shown in Figure 6, appears.
- - - - - - - - - 5259 Adapter
Tests--------~
- -
- -
-
-
-
-
-
-
- -
- -
--
- -
---
-
- -
-
- -
-
-
- -
- - -
•
-
5259 Adapter Tests
Version 2.90
(c) Copyright IBM Corp. 1995,1997
Enter=Continue
Fl=Help FJ=Quit
Figure 6. 5250 Emulation Adapter Tests Screen
Advertisement
Table of Contents
