Pioneer PD-X99M Service Manual page 41

Check items/
Adjustment
specifications
Adjusting
Oscilloscope Tast
a Points
Turn the Selector switch of the FTG Adjuster to 1. The
Selector switch is located on the left side of the panel.
Connect Oscilloscope to TP (Test Point) of FTG Ad-
juster. The TP is located on the right side of Selector
switch.
TP of
FREQ-2
adjuster
TP of
¢ Adjust two GAIN-2 potentiometers of the FTG Ad-
FTG-
GAIN-2
juster so that the amplitude of the output signal be-
adjuster Pots of
comes 0.4Vp-p.
FTG-
(center).
Connect Orange wire of FTG adjuster to CN101 pin6
(FO.in) of the player, Brown wire to TP1 pin1 (FO .OT),
Yellow wire to CN101 pin7 (TR.IN), Red wire to CN101
2 (TR.OT) and Black wire to chassis.
Press the TRACK FWD key, PLAY key and PAUSE key
by turns to close all servos.
Photograph 7-18
FTG Adjuster
44