Pf System Parameters - Yamaha PLG150-PF Owner's Manual

PF System Parameters

Part Assign
Settings: 01 — 16, off
This determines the Part to which the PLG150-PF voice is assigned. If a Part is not properly assigned
here, none of the PLG150-PF voices can be selected for the Part. (This applies to XG Plug-in System
compatible "mother" devices.)
VelCurve (Velocity Curve)
Settings: Normal, Soft1, Soft2, Soft3, Hard1, Hard2, Cross1, Cross2
This function lets you to produce determine how the volume of the PLG150-PF's Voices respond to
your playing touch (velocity). Eight different Velocity Curve settings (or curves) are available, letting you
tailor the response to your own preference.
The
Normal
Soft 1 to 3 allow you to produce a reasonably high volume with a
soft, light touch (low velocities).
Hard 1 and 2 produce high volume only with a hard, strong touch
(high velocities).
Cross 1 and 2 are "mirror image" curves, designed to be used
together with different voices in a layer to produce a velocity
crossfade effect. As shown in the illustration, the two curves
complement each other in a way that allows the Cross 2 applied
voice to sound at soft velocities, while the Cross 1 voice sounds
at high velocities.
The PLG150-PF voices can only be assigned to a single Part.
setting provides standard touch response.
Parameters
23