Table of Contents
Advertisement
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following. If you are using Plug-in Board Editor in the client application, refer to
the client application's owner's manual as well.
Sound does not change when using knobs or sliders.
• Are the MIDI Out port and Device Number set correctly in the Editor Setup?
Bulk data is not transmitted.
• Are the MIDI Out port and Device Number set correctly in the Editor Setup?
• Is the Dump Interval in the Editor Setup too short? Make sure the Dump Interval is at least 10
ms.
Sound is doubled when playing keyboard.
• On the "mother" device, switch Local to OFF.
No sound heard when clicking on-screen keyboard in Edit window.
• Is the MIDI Ch. set correctly in the Editor Setup?
Sound does not change when Monitor button is pressed.
• Are the MIDI Out port and Device No. set correctly in the Editor Setup?
MIDI Out port is not available in Editor Setup.
• The MIDI Out port in Editor Setup can be chosen from the MIDI Out ports in the System Setup of
the client application. Check the MIDI Out settings in the System Setup of the client application.
(Page 13)
20
(Page 13)
(Page 13)
(Page 13)
Advertisement
Table of Contents
