Table of Contents
Advertisement
Display
– – – –
End
(Fácil
)
(Prelav.
)
1
1
E:35 / -10
1
Example
Description
Programme status: Spinning
Programme status: Rinse hold
Programme status: Programme end
¡ Lights up: The childproof lock is activated.
¡ Flashes: The childproof lock is activated and the appli-
ance has been operated.
→ "Deactivating the childproof lock", Page 32
The crease-reduction function is activated.
→ "Buttons", Page 22
Prewash is activated.
→ "Buttons", Page 22
Shortened programme length is activated.
→ "Buttons", Page 22
Energy consumption
: Low energy consumption
¡
: High energy consumption
¡
Flashes: Drum cleaning is required. Run the Limp. tam-
bor
programme for cleaning and caring for the drum
and the outer tub.
→ "Cleaning the drum", Page 33
Lights up: The voltage control system has paused the pro-
gram due to impermissible voltage drops. The voltage is
permissible again and the programme continues.
→ " lights up.", Page 39
Note: The programme duration is extended.
Flashes: The voltage control system has paused the pro-
gramme due to impermissible voltage drops.
→ " flashes.", Page 39
Note: The programme continues when the voltage is per-
missible again.
¡ Lights up: The door is locked and cannot be opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
¡ No water pressure.
→ "E:30 / -10 and/or
¡ The water pressure from the tap is too low.
Error code, error display, signal.
→ "Troubleshooting", Page 37
for the selected programme.
", Page 39
Display en
21
Advertisement
Table of Contents
