Table of Contents
Advertisement
Troubleshooting
hers
Symptom
Cause and/or Corrective Actions
The Remote
Commander
supplied
with
your camcorder
does not work.
The picture
from
a TV or VCR does
not appear
even
when
your
camcorder
is connected
to outputs
on
the TV or VCR.
• COMMANDER
is set to OFF in the menu settings.
•_ Set it to ON. (p. 64)
• Something
is blocking
the infrared
rays.
Remove
the obstacle.
• The batteries
are inserted
in the battery
holder with the
+ - polarities
incorrectly
matching
the + - marks.
-_ Insert the batteries
with the correct polarity.
(p. 128)
• The batteries
are dead.
-_ Insert new ones. (p. 128)
• DISPLAY is set to V-OUT/LCD
in the menu settings.
-1, Set it to LCD. (p. 64)
The melody
or beep sounds
for 5
seconds.
While
charging
the battery
pack,
no
indicator
appears
or the indicator
flashes
in the display
window.
• Moisture
condensation
has occurred.
"_ Remove
the cassette
and leave your camcorder
for at
least I hour to acclimatize.
(p. 117)
• Some troubles
has occurred
in your camcorder.
"_ Remove
the cassette
and insert it again, then operate
your camcorder.
• The AC power
adaptor
is disconnected.
Connect
it firmly. (p. 14)
• Something
is wrong
with the battery
pack.
÷ Contact
your Sony dealer or local authorized
Sony
service
facility.
112
Advertisement
Table of Contents
