AEG COMPETENCE 5210 V Instruction Book page 14

1
nn nn
s HR
»_»>_( .
o o
i
mi
s SB
How to
programme
the oven
to switch off
automatically
- Select the cooking method and temperature as required.
- Press button B [H, hold it depressed, and enter the required
duration
with knob E (§3). The cooking duration appears in dis¬
play F and symbol @ is illuminated. When button B is released
the time of day appears in display F
- Symbol 0 shows throughout time controlled cooking.
You should
be aware of
the following:
The oven immediately switches on and automatically off
after the elapsed duration.
At the end, anaudible signal sounds for about two minutes
and symbol 0 flashes. By pressing button D [g] the oven
is switched from automatic to manual operation. Symbol
0 goes out.
After time controlled cooking, set the cooking method se¬
lector and temperature control to the off position.
The oven is ready to operate manually again.
You can check on the remaining
cooking duration
and the
cooking end
at any time during time controlled cooking by
pressing either button B @ or C 0.
If you want to cancel automatic operation, press button B 0 and
turn knob E |0) until 0.00 appears in the display F, Then set the
cooking method selector to the
0
and oven temperature control
to the off position.
14