Installation; General Instructions; Place Of Installation; Boiler Installation - Ferroli TOR Instruction For Installation And Maintenance

TOR

2. INSTALLATION

2.1 GENERAL INSTRUCTIONS

ALL CONNECTIONS TO THE POWER GRID AND ALL ELECTRICAL SYSTEMS MUST BE CARRIED OUT ONLY
BYY QUALIFIED SPECIALIST PERSONNEL, IN COMPLIANCE WITH ALL THE INSTRUCTIONS GIVEN IN THIS
TECHNICAL MANUAL, THE CURRENT PROVISIONS OF LAW, THE NATIONAL AND LOCAL REGULATIONS, AND
THE RULES OF PROPER WORKMANSHIP.
Do not tamper with the electrical devices during maintenance operations.
A device integrated in the boiler interrupts the power supply of the heating elements in the event of excessive absorption
or following intervention of the safety thermostat.
The installer must instruct the user on how to use the boiler.
The user can only use the control panel, following the manual and the manufacturer's instructions.

2.2 PLACE OF INSTALLATION

The unit is suitable for indoor installation or outdoors in a partially protected place with temperatures to -5 °C.

2.3 BOILER INSTALLATION

The boiler is arranged for wall mounting and comes as standard
with a hooking bracket. Wall fixing must ensure stable and
effective support for the generator.

2.3.1 Recommended distances

If the unit is enclosed in a cabinet or mounted
A
alongside, there must be sufficient space for
removing the casing and for normal maintenance
activities
Minimum distance
A 3 cm
B 10 cm
C 40 cm
15 cm (starting from the initial
D
openable cover)
Recommended distance
15 cm
30 cm
50 cm
>25 cm
cod. 3542B750 - Rev 09 - 02/2024
fig. 5
fig. 6
EN
13