Program Change Assign - Yamaha 03D Owner's Manual

Program Change Assign

The PGM Asgn. page is used to assign 03D scene memories to MIDI Program Changes.
Program Change messages can be used to recall 03D mix scenes. See Using MIDI Pro-
gram Change Messages on page 169 for more information. Scene memories can be
assigned to Program Change messages from 1 to 128. Initially, scene memories 1 to 50
are assigned sequentially to Program Changes 1 to 50. Scene memory 00 is assigned to
Program Change 51.
When using MIDI Program Change messages to recall mix scenes, be sure to configure
the MIDI Setup page. See MIDI Setup on page 235 for more information.
1. Use the [MIDI] button to locate the PGM Asgn. page shown below.
2. Use the cursor buttons to select the PRM CHG. column, and then use the
PARAMETER wheel to select a Program Change.
If you are using a mouse, position the mouse cursor over the PRM CHG. parameter
box, press and hold the left mouse button, and then drag the mouse.
3. Press the [ ] cursor button to select the SCENE No./TITLE column, and
®
then use the PARAMETER wheel to select a scene memory.
If you are using a mouse, position the mouse cursor over the SCENE No./TITLE
parameter box, press and hold the left mouse button, and then drag the mouse.
To reset the Program Change assignments to their initial set-
tings, use the cursor buttons to select the INITIALIZE switch,
and then press the [ENTER] button. If you are using a mouse,
simply click the INITIALIZE switch. The dialog box shown here
appears. Click OK to initialize.
A scene memory to Program Change assignment table is pro-
vided on page 267. The scene memory to Program Change assignment table can be
backed up to an external MIDI device, such as a MIDI data filer, using MIDI Bulk
Dump. See Bulk Dump on page 242 for more information.

Program Change Assign

03D—Owner's Manual
239