Mounting The Optical Pick-Up Block Assembly - Sony MDP-V10 Service Manual

2-13. MOUNTING THE OPTICAL PICK-UP BLOCK ASSEMBLY

Note: Follow the assembly procedure in the numerical order given.
Flexible cable
retainer spring
6 Turn power on.
Optical pick-up block moves
into feed base block ass'y.
Flat cable
Optical pick-up block
4 Confirm the flat cable goes through the flex-
ible cable retainer spring and over the shaft.
Flat cable
Shaft
Shaft
Two claws
1 Insert flat cable to housing on
optical pick-up block.
Confirm the claws on both sides
of housing are locked.
5 Insert plug to wall socket.
Three rollers
Feed base block
Shaft
Housing
2 Insert the shaft and three rollers of the optical
pick-up block into their corresponding grooves
of the U guide.
3 Set so that the gear of the optical pick-up block
engages with the rack of the U guide.
2-8
Feed block ass'y
Optical pick-up block
U guide
Rack