Studio Manager - Yamaha 01X Software Installation Manual

Changing settings after installation
The mLAN-related settings can be changed after installation from the
mLAN Driver Setup window. To display it, start the mLAN Driver Setup
in the Control Panels folder.
mLAN Driver Setup
This window lets you check and change the mLAN settings for receiving/
transmitting data. Make sure to close any application (DAW, etc.) using
the mLAN connection before making changes. The settings here are the
same as that in Windows. See page 10.
• The Mode setting is only for Windows.
• The [EXIT] button is only for Windows.
• To change the wordclock (sample rate) and the number of channels used, Start the
mLAN Auto Connector in the mLAN Tools folder.

Studio Manager

Installation of Studio Manager
1
Double-click the "Install Studio Manager" icon in the "StudioManager_"
folder to display the following installation screen. The "Install Location"
box displays the destination of the installation. If you wish to change the
destination disk or folder, use the [Switch Disk] button and the pop-up
menu to specify the desired destination.
• In general, there is no need to change the destination directory.
2
In order to install the Studio Manager owner's manual (PDF), select
[Custom Install], make sure that "Studio Manager for 01X" and "*****PDF-
Manual" are checked ("***" indicates the selected language), then click
[Install].
Select [Custom Install]
3
When installation is finished, a "Installation was successful." message
appears. Click [Quit].
22
TOOLS for 01X/Plug-in Effect Installation Guide
OMS Port Setup
4
Start up Studio Manager by double-clicking its icon.
• If AppleTalk is enabled, you will get an alert message. Click "OFF." It will take
some time for AppleTalk to be disabled.
5
Choose "Selects OMS Ports" from Studio Manager's "File" menu, then
select the port settings.
Input Port: Select "Studio Manager" (Port 4).
Output Port: Select "Studio Manager"(Port 4).
6
Click [OK] to close OMS Port Setup.