• Do not power cycle your GWN7662 during system boot up or rm- Step 1: Plug a RJ45 Ethernet cable into the network port o GWN7662. ware upgrade. You may corrupt rmware images and cause the unit Step 2: Plug the other end into the uplink port o the power over Ethernet to malfunction.
GWN7662. tab o the mounting bracket and ensure that your GWN is rmly 5. Align the arrow on the GWN7662 AP with the arrow on the locking tab seated on the mounting bracket and connect the network and power o...
Method 1: Discover GWN7662 using its MAC Address otherwise the conguration interace cannot be accessed ● I the GWN7662 is already paired, make sure to unpair it rst, or do a 1. Locate the MAC address on the MAC tag o the unit, which is on the actory reset.