Table of Contents
Advertisement
Section 3
You can use the Access Point's built-in Web Configuration Utility to configure the encryption settings and
operating modes. This section describes how to configure the Access Point's wireless and security
settings. For information on the different operating modes, please refer to Section 4, Selecting
Operating Modes.
Step 1
Open your Web Browser (Internet Explorer or Netscape), enter the IP Address of the Access
Point (default: 192.168.1.250) in the Address Bar and press Enter.
Note: If you have changed the IP Address of the Access Point, enter its
new IP Address instead of the default.
Step 2
Enter admin for both the User name and Password and click OK.
Using Web Configuration Utility
Advertisement
Table of Contents
