Ryobi PBF102 Instructions

18 VOLT ONE+ 3 IN. VARIABLE
SPEED DETAIL POLISHER/
SANDER - PBF102
NOTE: These instructions supplement the OPERATION instructions
in your operator's manual. For complete operation instructions, refer
to page 7 of the Operator's Manual.
WARNING:
This insert sheet is not a substitute for reading the operator's
manual. To reduce the risk of injury or death, user must read and
understand operator's manual before using this product.
WARNING:
Hot Surface - To reduce the risk of injury or damage, avoid
contact with any hot surface.
WARNING:
After extended continuous use of 15 minutes or more, allow the
tool to cool before using the spindle lock or touching the gear
housing. The gear housing may get hot after extended use and
cause serious personal injury.
WARNING:
To prevent loss of control and possible serious personal injury,
always operate the tool with both hands, keeping one hand on
the side handle.
Fig. 1
A - Side handle (poignée latérale, mango lateral)
B - Spindle lock button (bouton de verrouillage
de broche, botón de bloqueo del husillo)
C - Gear housing (carter d'engrenages, carcasa
del engrane)
WARNING:
The side handle must always be used to help prevent loss of
control and possible serious injury.
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579 • www.ryobitools.com
A
B
C
998000631
4-30-21 (REV:01)