Table of Contents
Advertisement
EFFECT SELECTOR AND BANK SELECTOR (11)
Rotating thc BANK SELECTOR control determines which particular digital bank is selected for use. As will be
seen from the front-panel illustration, digital effect banks are available from small room
reverbs through extra-
large rooms, gated reverbs, delays, echos and multi-effects. Rotating the EFFECT SELECTOR control deter-
mines which particular stereo digital effect is drawn from whichever bank has been selected by means of the
BANK SELECTOR switch.
NOTE: Refer to the chart printed on the faceplate and select one of the 128 effects using the BANK and SE-
LECT switches. There are 16 effects settings for each BANK. Use the BANK switch to choose the type of effect
and the SELECT switch to choose which variation of this effect to use.
STEREO 9-BAND GRAPHIC EQ (12)
OPERATION NOTE: This equalizer is designed to provide room equalization, feedback control and system
tone control. No amount of equalization will correct the response curve of a poor loudspeaker. Always begin
with all sliders in the "0" position and avoid excessively cutting large segments of the audio passband, which
would limit the system's dynamic range.
MASTER GAIN (13)
Controls the overall volume level of the main system. The signal from this control is available at the main output
(19). Under normal conditions this signal is also internally patched through the graphic EQ and power amplifiers
so that this control sets the volume of the speakers connected to the external speaker jacks (36). Maximum
master signal level is obtained by rotating this control fully clockwise. Minimum master signal-level is
obtained by rotating this control fully counterclockwise.
MASTER MONITOR (14)
Controls the overall monitor mix level. Maximum monitor signal level is obtained by rotating this control fully
clockwise. Minimum monitor signal level is obtained by rotating this control fully counterclockwise.
EFFECTS MASTER (15)
Controls the effects level supplied to the internal effects and the effects out jack. Maximum effects signal level is
obtained by rotating this control fully clockwise, Minimum effects signal level is obtained by rotating this
control fully counterclockwise.
EFX RETURN (16)
Controls the level of the stereo EFX in the main system mix. Maximum effects return signal level is obtained by
rotating the control fully clockwise. Minimum effects return signal level is obtained by rotating this control fully
counterclockwise.
EFX TO MONITOR (17)
Controls the level of the EFX in the monitor system. Maximum monitor effc
rotating this control fully clockwise. Minimum monitor effects signal level
fully counterclockwise.
signal level is obtained by
obtained by rotating this control
Advertisement
Table of Contents
