Adjusting The Audio Balance - Yamaha YSP-800 Owner's Manual

ADJUSTING SYSTEM PARAMETERS
4
Press / to switch between PRESET:
RESET and PRESET: CANCEL.
PRESET: RESET
PRESET: CANCEL
• Select PRESET: RESET to reset all of the current
settings.
• Select PRESET: CANCEL to cancel the resetting
procedure.
5
Press STANDBY/ON on the front panel or on
the remote control to set this unit to the
standby mode.
STANDBY/ON
Front panel
The new setting will be activated when you turn on
the power of this unit next time.
78
ENTER
VOL
VOL
or
Remote control

Adjusting the audio balance

You can adjust the sound beam output level of each
speaker by using the test tone or the audio output being
played back in each beam mode to achieve a more true-to-
life surround sound experience.
Notes
• All the speaker levels cannot be adjusted when the stereo mode
is selected as the beam mode (see page 42).
• FRONT L/R cannot be adjusted when the stereo plus 3 mode is
selected as the beam mode (see page 41).
• Only CENTER can be adjusted when the target mode is
selected as the beam mode (see page 43).
y
If the level of a particular speaker cannot be adjusted, – –dB
appears in the front panel display.
■ Using the test tone
You can use the test tone feature to output a test tone from
each speaker to manually balance the speaker levels.
Use the test tone to set speaker levels so that the volume
level of each speaker is identical when heard from your
listening position.
SPORTS
0
CH LEVEL
TEST
1
Press TEST on the remote control.
TEST LEFT appears in the front panel display and a
test tone is output from the front left speaker.
TEST LEFT
OFF SURROUND
+10
CINEMA DSP
MENU
ENTER
RETURN
TEST
VOL