Table of Contents
Advertisement
1
From the home screen, press Menu
Mototalk.
2
Select the code field, scroll to a code and press
to select it.
Press Done.
3
Make code calls
To make a code call:
1
Press and hold the PTT Button. Begin speaking after
you hear the MOTOtalk tone.
2
Release the PTT Button to listen.
If you receive an error message, it may mean:
•
No one is on your channel or code.
•
You are out of range.
Receive code calls
After hearing the MOTOtalk tone, you have 6 seconds
to reply before the call times out.
To reply to the call, press and hold the PTT Button.
Note:
A MOTOtalk call can be ended at any time by
pressing End/Power
16
MOTOtalk™
> Tune
.
Receive all MOTOtalk calls
If you set the code to Receive All, your phone can
receive MOTOtalk transmissions from any phone that
OK
is set to the same channel, regardless of the code
(1-15). When you receive transmissions with the code
set to Receive All, the code that the transmission was
received on will replace Receive All on the display.
Note:
You cannot initiate a code call when the code is
set to Receive All.
To set the code to Receive All:
1
From the home screen, press Menu
Mototalk.
Select the code field, scroll to Receive All and press
2
to select it.
OK
Press Done to return to the home screen.
3
Private MOTOtalk calls
If you want to have a private conversation without
other parties listening in, you can make a private
MOTOtalk call. The person you are calling must be in
MOTOtalk and set to the same channel to receive your
call.
> Tune
Advertisement
Table of Contents
