BenQ W2000+ User Manual page 31

Enable this function to help correct the projected picture's color when the projection
• Wall Color
surface is not white. You may choose a color similar to that of the projection surface
from these options: Light Yellow, Pink, Light Green, or Blue.
• Projector
The projector can be installed on a ceiling or behind a screen, or with one or more
Position mirrors. See
Enable this function to display the grid test pattern, which helps you adjust the image
• Test Pattern
size and focus so as to check if the projected image is free of distortion.
Sets whether the projector searches automatically for input sources. Select On to
• Auto Source
enable the projector to scan for input sources until it acquires a signal. If the function
is set to Off, the projector selects the last used input source.
• Menu Type
Switches to the Advanced OSD menu.
Selects an input source type for the HDMI signal. You can also manually select the
source type. The different source types carry different standards for the brightness
• HDMI
level.
Format
Activate this function only after a new lamp is installed. When you select Reset, a
• Reset Lamp
"Reset Successfully" message is displayed to notify that the lamp time has been
Timer
reset to "0".
Returns all settings to the factory preset values.
• Reset All
Settings
Displays the following information about your projector.
• Information
Choosing a location
HDMI Format is only available when the HDMI signal is selected.
The following settings will still remain: Keystone, Rename User Mode, L/R
Switch, Language, Projector Position, Menu Type, Source Rename, Reset Lamp
Timer, Test Pattern, High Altitude Mode, Password, Key Lock, and ISF.
•
Source: Displays the current signal source.
•
Picture Mode: Displays the current Picture Mode.
•
Resolution: Displays the native resolution of the input source.
•
Color System: Displays input system format.
•
Lamp Usage Time: Displays the number of hours the lamp has been used.
•
3D Format: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
•
Firmware Version: Displays the firmware version of your projector.
Some information is given only when certain input sources are in use.
for details.
Menu Functions 31