Table of Contents
Advertisement
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the instructions
below:
Use the arrow keys (
use OK to confirm the selected menu item.
•
When there is a video signal connected to the projector
i. Go to the Settings > Menu Type menu and press OK.
ii. Use
/
iii. Press BACK again to access the Advanced OSD menu.
•
When there is NO video signal connected to the projector
i. Go to the Menu Type menu and press OK.
ii. Use
/
iii. Press BACK again to access the Advanced OSD menu.
Next time you turn on the projector, you may access the Advanced OSD menu by pressing MENU.
Below is the overview of the Advanced OSD menu.
Picture
Picture Mode
User Mode Management
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Lamp Power
Advanced...
Reset Current Picture Mode
PC
Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD menu, follow the
instructions below:
i. Go to the System Setup : Basic >
ii. Use
/
Next time you turn on the projector, you may access the Basic OSD menu by pressing MENU.
28
Menu Functions
/
/
/
) on the projector or remote control to move through the menu items, and
to select Advanced and press OK.
to select Advanced and press OK.
Vivid
50
50
50
50
7
Normal
Exit
to select Basic to directly access the Basic OSD menu.
> Menu Type menu and press OK.
Menu Settings
Advertisement
Table of Contents
