Panasonic SC-AK630 Operating Instructions Manual page 13

Press [PRESET EQ] t eeemect asetting.
Every time y ou press the button:
HEAVY -_ SOFT _ CLEAR - _ DISCO
- -_ LIVE -_ HALL
t EQOFF o I
(cancelled)
HEAVY (sound quality) :
SOFT(sound quality) :
CLEAR (sound quality):
DmSCO (sound fie_d) :
UVE (sound fie_d)
HALL (sound fie_d) :
Adds punch to rock
For background music
Clarifies higher sounds
Produces sound with the same kind of
lengthy reverberations heard st a disco
Makes vocals more alive
Adds an expansiveness to the sound to
produce the atmosphere of s great concert
hall
You cannot use PRESET EQ together with H.BASS.
You can enhance low-frequency sound so that heavy bass sound can
be heard clearly, even if the acoustics of your room are not optimal.
Press [H.BASS].
The button light comes on.
Press the button again to cancel.
The button light goes out.
Press [SUBWOOFER].
Remote control: Press [SHIFT] + [S.WOOFER].
The button light comes on.
Each time you press the button:
MID (medium) _ MAX (high) _ Light off (off)
f
To eanee_
Press [SUBWOOFER] to turn the light off.
Remote control: Press [SHIFT] + [S.WOOFER].
You cannot use this function when headphones are connected.
Analog player
(not included)
o An analog player with a built-in phono equalizer can be connected.
,, For details, refer to the instruction manual of the units which are to
be connected.
" When units other than those described above are to be connected,
please consult your audio dealer.
(See above for external unit connection.)
1. Press [AUX].
The unit comes on.
2. For listening: Proceed to step 3.
For recording: Press [O, REC] (recording starts).
3. Start playback from the external source. (For details, refer to the
external unit's instruction manuaL)
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (_/s") stereo
Avoid listening for prolonged periods of time to prevent hearing damage.
Remote contro_ onmy
When disc or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
Press [SHJFT] + [AUTO OFF].
"AUTO OFF" is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, "AUTO OFF" goes out. It
comes on again when you select disc or tape.
To cancel
Press [SHIFT] + [AUTO OFF] again.
To dim the dispmay panet
Remote control onLV.
Press [DIMMER].
The display is dimmed and the indicators are turned off,
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
Switching diepJaye ]
Press [DISP, -DEMO] to select the desired dispmay mode.
Every time you press the button:
Normal _ Peak hold _ Reflection
f (off) _, I
To mute the volume ]
Remote control onmy.
Press [MUTING].
Press the button again to cancel.
"MUTING" goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.
ROT7834