Stereo-Link™: Syncing Between Two Speakers - ION SPORT 320 User Manual

Stereo-Link™: Syncing Between Two Speakers
If you would like to play music from a Bluetooth device, you can first "link" two Sport™ 320˚
speakers together in order to listen to your music in stereo. One Sport™ 320˚ will serve as the
left speaker and the other will serve as the right speaker.
1 - PRESS AND HOLD
To link two Sport™ 320˚ speakers together:
Note: When you begin the Stereo-Link™ process, any connected Bluetooth devices will be
automatically disconnected. You can also disconnect your device prior to beginning by
double-pressing the Bluetooth button.
1. Press and hold the Stereo-Link™ button on each Sport™ 320˚ speaker. Once a link has been
established, the Link icon will remain on the Display. The Aux and FM modes will be
disabled on both speakers once the two speakers are linked.
Note: Please allow up to a minute for the speakers to link. The closer the speakers are, the
faster they will link.
2. Once linked, the primary speaker will go into Bluetooth mode and look for a connection
(Bluetooth icon flashing). Once connected to the Bluetooth device, the Bluetooth icon will
remain solid. By default, once Bluetooth is connected, the primary speaker is the left
speaker. To switch the primary speaker to be the right speaker, press the Bluetooth button.
3. Navigate to your device's Bluetooth settings menu and select SPORT™ 320 to connect.
When the connection is successful, you will hear "Bluetooth Connected" from the primary
speaker (if voice prompts are enabled). When Bluetooth audio playback begins, you should
hear it through both speakers. The primary speaker will play the left channel while the
secondary speaker plays the right channel. Playback controls are active on both speakers.
To disconnect two speakers or cancel linking between the two, double-press the
Stereo-Link™ button on either speaker.
ION Audio Sport™ 320˚ User Guide
(on the each speaker)
2 - PRESS AND RELEASE
(on the Primary speaker)
3
12