Operation; Bluetooth® Connecting With Sport™ 320 - ION SPORT 320 User Manual

OPERATION

Bluetooth® Connecting with Sport™ 320˚
1 - PRESS
1. Turn on your Bluetooth device.
2. Power on Sport™ 320˚ by holding down the Power button for 2 seconds. When the unit is
first turned on, it will automatically enter Bluetooth pairing mode. The Bluetooth icon on
the display will flash to indicate the speaker is ready to pair and if voice prompts are
enabled, you will hear "Bluetooth Pairing."
3. Navigate to your device's Bluetooth setup screen, find SPORT 320, and connect. The
Bluetooth icon will appear in the display, and if voice prompts are enabled you will hear
"Bluetooth Connected".
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
Note: Do not connect to iPA159B_BLE; this is reserved exclusively for connecting to the
ION Sound Control™ app. If you experience trouble in connecting, select "Forget this
Device" on your Bluetooth device and try to connect again.
To change to AUX mode, press and release the Bluetooth button.
To disconnect the paired Bluetooth device, double-press the Bluetooth button.
Tip: If you would like to disable (or enable) the voice prompts, press and hold the Play / Pause
button for five seconds.
ION Audio Sport™ 320˚ User Guide
2 - PRESS
3
11