Outdoor Unit And Remote Control Installation - Trane MCC Series Installation Operation & Maintenance

Outdoor Unit Installation
Where to Install outdoor Unit
•
The foundation must be solid
enough to bear the weight and
ibration of the unit.
•
The space around the unit is
adequate for ventilation.
•
The location is not close to any
flamable gases.
•
The location is sufficiently isolated
so that the running noise and the
hot exhaust air do not disturb the
users or their neighbors.
•
Easy access to check and to
maintain.
•
Ensure the spaces indicated by
arrows from the wall, ceiling, fence
or other obstacles.
Caution
Installation in the following places may
cause problems. If it is unavoidable
to use such places, consult with your
distributor or dealer.
•
A place with machine oil
•
A saline place such as a place very
close to a seashore.
•
A place with sulphur gas.
•
A place where high-frequency
waves are generated by radio
equipment, welder and medical
equipment.
Remote Control Installation
Locate and attach the wireless
remote control as follows :
•
Do not place the remote control
near heat sources or expose to
the direct rays of the sun.
•
Do not expose the remote control
to the indoor unit's supply air
stream.
•
Do not place in a confined space.
•
Attach the remote control holder
as shown in figure 8.
MCC-SVN01A
More than 30 cm.
More than 120 cm.
More than 30 cm.
More than 120 cm.
www.ttair.co.th | Tel : 02-385-0728 | E-mail : sales@ttair.co.th | LINE ID : @ttair
Figure 6
More than 30 cm.
Figure 7
Wireless Remote Control
Figure 8
More than 30 cm.
More than 50 cm.
More than 50 cm.
7