4.5.12 IPv6
This page is used to configure parameter for IPv6 internet network which connects to WAN port of the VPN
Security Gateway as shown below. It allows you to enable IPv6 function and set up the parameters of the
VPN Security Gateway's WAN. In this setting you may change WAN connection type and other settings.
Object
Connection Type
IPv6 Address
Subnet Prefix Length
Default Gateway
Figure 4.5-15 IPv6 – WAN Configuration
Figure 4.5-16 IPv6 – LAN Configuration
Select IPv6 WAN type either by using DHCP or Static.
Enter the WAN IPv6 address.
Enter the subnet prefix length.
Enter the default gateway of the WAN port.
- 91 -
Industrial VPN Security Gateway
IVR-100_IVR-300 Series
Description